Integrated Wireless Base Station Powered by Poe Simplifies Reduces Installation Cost

Product Description

Product Description

SW8000NBU is an outdoor, carrier-grade wireless base station with an integrated antenna. It operates in the 5GHz unlicensed frequency band and is compliant with the IEEE802.11n standard. It utilizes a high-performance Qualcomm Atheros high-speed network processor and IEEE802.11a/n MIMO (Multiple Input Multiple Output) technology. It employs a 2T2R architecture and supports wireless transmission rates up to 300Mbps. With a combined RF power output of up to 2x500mW and a sensitivity of -96dBm, the device integrates 2x2 MIMO directional antennas. It is ideally suited for long-distance backbone network transmission projects and high-definition video surveillance applications for large data streams, such as those in oilfields, power generation, water conservancy, forestry, industrial and mining enterprises, safe cities, intelligent transportation, and digital energy.

The SW8000NBU supports point-to-point (PTP) and point-to-multipoint (PTMP) wireless applications, and features wireless roaming (WDS), virtual AP, and mobile Wi-Fi access management. It also supports routing, firewall, VLAN, NAT, VPN, DHCP, ACL, WatchDog, and NTP. It connects LAN devices distributed across locations and buildings, offering a wide range of applications, strong anti-interference capabilities, and high bandwidth. Its cast aluminum housing is weatherproof, windproof, rainproof, lightning-proof, sun-proof, dustproof, shockproof, and heat-dissipating. It also supports a "one-click restore" function, requiring no specialized setup and maintaining exceptional maintenance. Powered by Ethernet, it is easy to install and operate outdoors. 

Application Scenarios

Product Parameters

Product Model	SW8000NBU
RF
Frequency Band	IEEE802.11a/n: 4920~ 6100MHz
Channel	5/10/20/40MHz
RF Power Output	2*500mW
Sensitivity	802.11a:-96dBm@6Mbps,-80dBm@54Mbps 802.11n :-96dBm@MCS0,-75dBm@MCS7
Modulation	OFDM:BPSK QPSK16-QAM 64-QAM DSSS:DBPSKDQPSK CCK
Data and operating parameters
Maximum operating rate	300Mbps
Automatic rate selection	802.11a(HT20):6/9/12/18/24/36/48/54Mbps 802.11n(HT40):30/60/90/120/180/240/270/300Mbps
Standards	IEEE 802.11a/n/h/d;IEEE802.3u/d/ab
Supported protocols	CSMA/CA,TDMA,TCP/IP,IPX/SPX,NetBEUI,DHCP,SNMP,STP,NTP NDIS3,NDIS4,NDIS5
Data and operating parameters
Operating Mode	Point-to-point and point-to-multipoint
Wireless Transmission Protocol	802.11, proprietary protocols
DHCP	DHCP Server/DHCP Client
Mobile Wi-Fi Access	Supported
Spectrum Scanning	Supports spectrum scanning and analysis
Seamless Roaming	Supported
Dynamic Frequency Selection	Supports Dynamic Frequency Selection (DFS)
Asymmetric Bandwidth Allocation	Supports asymmetric bandwidth, with adjustable uplink and downlink bandwidths
Signal Strength Indicator	5-level LED indicator
Watchdog Timer	Supports dual watchdog timers for both the network interface and radio frequency, preventing crashes and ensuring exceptional stability
Reset/Reboot	Supports hardware and software resets
Bandwidth Test	Supports bandwidth testing
SNMP Management	Supported
Security Features
Data encryption	WEP/WPA/WPA2/AES/TKIP/EAP,Private protocol encryption
SSID hiding	Supported
Hardware Specifications
CPU Chipset	AR9342/AR9283
CPU Clock Speed	600MHz
Memory	64MB DDR2
Dimensions	450×270×90 mm
Weight	2.8Kg
Power Supply Voltage	AC: 100-240V (default), DC: 8-30V (default)
Power Supply Port	PoE (default)
Power Consumption	Maximum 12W
Network Port	1 Gigabit PoE Ethernet port
Antenna Port	Built-in 16dBi 90-degree dual-polarization sector antenna
Mounting	Universal clamping pole, pole outer diameter: 15 to 75mm
Environmental requirements
Environmental adaptability	IP68 fully enclosed design for dust and water resistance.
Decompression vent valve	Constructed of 304 stainless steel, IP68 encapsulation, 230ml/min air flow rate.
Surge protection	Common mode: 6kV, differential mode: 4kV
Static static protection	Contact: 10kV, air: 20kV
Operating temperature	-50°C to +80°C
Storage temperature	-55°C to +90°C
Operating humidity	0% to 100%

Product Advantages

Please enter the title here

1,Standard compatibility:Compliant with  IEEE 802.11a/n/ac standards,Adopting advanced technologies such as MIMO and OFDM;

2, Stable and Reliable: MBTF exceeds 200,000 hours, eliminating crashes and disconnections.

3,Transmission Rate: 2x2 MIMO supports a maximum rate of 300Mbps.

4, Transmission Distance: High transmit power combined with high receive sensitivity allows the integrated antenna to reach distances exceeding 10km.

5,Gigabit Interface: Provides one Gigabit auto-sensing Ethernet port with Gigabit PoE support.

6,Bandwidth Selection: Supports 5/10/20/40MHz bandwidth, with 40MHz bandwidth providing up to 300Mbps transmission speed.

7,TDMA Protocol: Supports a proprietary TDMA protocol, effectively improving point-to-multipoint wireless transmission efficiency.

8,Bandwidth Management: Supports WMM (QoS) , supporting priority mapping between air and wired interfaces to ensure voice and video service priority.

9,Antenna Calibration: A 5-level LED indicator automatically displays received signal strength, facilitating installation and commissioning.

10,Interference Immunity: Beamforming technology effectively suppresses interference and minimizes its impact on data rates.

 11,PoE Power Supply: Supports Gigabit PoE, facilitating installation and maintenance.

 12,Adjustable Power: Adjustable transmit power, with a maximum single-channel high-power RF output of 500mW.

 13,Multiple Features: Supports beamforming, space-time block coding (STBC), and low-density parity check (LDPC).

 14,Encryption: Supports WEP, WPA, WPA2, AES, TKIP, EAP, and 802.1X;

 15,Automatic Frequency Scanning: Supports Dynamic Frequency Selection (DFS), automatically scanning and selecting the optimal channel based on the surrounding wireless environment;

 16,Industrial Appearance: Metal cast aluminum housing with IP68 sealing is dustproof, waterproof, windproof, sunproof, shockproof, and heat-resistant, with excellent high and low temperature stability;

 17,Integrated Vent: An integrated stainless steel decompression vent with IP68 sealing continuously balances the air pressure inside and outside the device cavity, preventing dust intrusion and reducing condensation, enhancing device reliability in harsh environments;

Success Cases

Packing & Delivery

Q1: Are you a factory or a trader?
A: We are a manufacturer integrating industry and trade, welcome to visit our company.
 
Q2: Can I add my LOGO to the product?
A: We support on-demand customization, including LOGO customization, color customization, appearance size customization, etc.
 
Q3: What payment methods do you support?
A: We support T/T, Western Union, Paypal, cash, etc. The details can be negotiated.
 
Q4: What are your modes of transportation?
A: We usually choose the appropriate mode of transportation (sea, air, land) according to the conditions of the goods, or we can choose the mode of transportation according to your requirements.
 
Q5: How can I get an accurate quotation?
A: You can first send your specific demand information and product pictures, and we will customize a solution for you according to your needs and inform you of the specific price.